Brass Water flow Sensor 1 Inch

₹1,017.00

Water quality requirement: Drinking water health standards, 0~80℃
Flow range: 4~45 Liter/Min
Voltage/electric current: DC 4.5 ～ 18 Volt, ≤15mA
Insulation resistance : >100MΩ
Withstand hydraulic pressure: ≤1.75 MPa
Electrical strength: AC500V, 50HZ
Output level: Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤0.5 Volt
Pulse duty cycle: 50%
Flow characteristic: F=5Q-3, F: HZ, Q: L/min, ±10%
Cumulative flow conversion: 1 Liter water=225 pulse, accuracy : 10%

SKU: Water flow sensor 1" Category: Sensor & Load cell

Application

Widely used in water industrial field, such as thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.

Note:

When magnetic material is close to the sensor, its characteristics may vary.

In order to avoid particle debris, the sensor must be installed after a filter.
The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.

There are no reviews yet.