1__4-inch-wfs

Brass Water Flow Sensor 1/4″

₹412.00

Features of Brass water flow sensor ¼ inch

Water quality requirement: Drinking water health standards, 0～80℃

Flow range : 0.35 ～ 3.0 Liter/min

Withstand hydraulic pressure: ≤1.75 MPa

Voltage/electric current : DC 4.5 ～ 18 Volt, ≤15mA

Insulation resistance : >100MΩ

Electrical strength: AC500V, 50HZ

Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt

Pulse duty cycle: 50%

Flow characteristic: F=73Q, F: HZ, Q: L/min，±10%

Cumulative flow conversion: 1 Liter water=1780 pulse, accuracy: 8%

SKU: Brass Water Flow Sensor 1/4 inch Category: Sensor & Load cell

Description
Reviews (0)

Application

Widely used in water industrial field, such as thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.

Note:

When magnetic material is close with the sensor, its characteristics may vary.

In order to avoid particle debris, the sensor must be installed after a filter.

The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.

Reviews

There are no reviews yet.

Be the first to review “Brass Water Flow Sensor 1/4″” Cancel reply